Home > Design Café > Technical Specifications

Technical Specifications 2010-Fazer 8/ABS

Engine
Engine typeLiquid-cooled, 4-stroke, forward inclined parallel 4-cylinder, DOHC
Displacement779 cc
Bore x stroke68.0 × 53.6 mm
Compression ratio12.0 : 1
Maximum power78.1 kW (106.2 PS) @ 10,000 rpm
Maximum torque82.0 Nm (8.4 kgf-m) @ 8,000 rpm
Lubrication systemWet sump
Fuel SystemElectronic Fuel injection
Clutch typeWet, multiple-disc coil spring
Ignition systemTCI
Starter systemElectric
Transmission systemConstant mesh, 6-speed
Primary reduction ratio65/43 (1.512)
Secundary reduction ratio46/16 (2.875)
Final transmissionChain
Ratios gearbox 1st35/13 (2.692)
Ratios gearbox 2nd33/16 (2.063)
Ratios gearbox 3rd37/21 (1.762)
Ratios gearbox 4th35/23 (1.522)
Ratios gearbox 5th27/20 (1.350)
Ratios gearbox 6th29/24 (1.208)
Chassis
ChassisDiamond frame
Front suspension systemTelescopic fork
Front wheel travel130 mm
Rear suspension systemSwingarm (link suspension)
Rear wheel travel130 mm
Caster angle25°
Trail109 mm
Front brakeHydraulic dual disc brake, Ø 310 mm
Rear brakeHydraulic single disc, Ø 267 mm
Front tyre120/70 ZR17M/C (58W)
Rear tyre180/55 ZR17M/C (73W)
Dimensions
Overall length2,140 mm
Overall width770 mm
Overall height1,225 mm
Seat height815 mm
Wheelbase1,460 mm
Minimum ground clearance140 mm
Service weight (incl. liquids)215 kg / ABS: 220 kg
Fuel tank capacity (reserve)17 L
Engine oil tank capacity3.8 L

Specifications and appearance of Yamaha products shown here are subject to change without notice and may vary according to requirements and conditions. For further details please consult your Yamaha dealer.

Give us your opinion

Go To Surveys